Introduction: SUS304 is the material baseline for an industrial vegetable washing machine, while approval depends on contact surfaces, cleaning conditions, and a document set agreed before purchase.
SUS304 gives an industrial vegetable washing machine a sound material base. The approval decision goes further: which parts touch produce, how those surfaces are finished and welded, what the seals and piping are made of, and what cleaning routine the machine must withstand. A specification review often begins with one line in the quotation: material SUS304. That line identifies the alloy family, which is useful, while the food-contact specification still needs a contact-path map, an agreed surface finish, confirmed non-metal parts, and the documents that should accompany the machine. The PH-6000 provides a practical reference for that review.
A vegetable washing machine works in a wet, abrasive environment. Produce arrives with soil, leaf fragments, and field water; the tank runs continuously; detergent and rinse water contact the same surfaces repeatedly. SUS304 is the Japanese Industrial Standard name for the 18/8 chromium-nickel austenitic grade also sold as AISI 304 and UNS S30400. Grade 304 stainless steel combines good corrosion resistance with straightforward welding, forming, and bending, which explains its wide use in food equipment. In a washer, the steel must hold a deep water bath, accept welded pipe connections, and present a surface that can be cleaned. Product information for the PH-6000 lists SUS304 as the machine material and describes food-contact parts as 304 food-grade stainless steel, covering the tank and trough, bubble manifold and perforated plate, spray piping, mesh or belt carrying leaves through the bath, and frame and guards around them. Because the unit works as an air bubble cleaning machine, the tank holds a large water volume and the blower runs continuously, so the steel is exposed to splashing and humid air beyond the produce path. The same specification gives 380V, 1.5kW electrical input and an overall size of 6000 × 800 × 1300 mm. Those figures drive the power connection, floor footprint, and handoff to the next station. Grade 304 suits most fresh-water washing duty; higher-chloride water or aggressive sanitizer programs are the usual reasons a plant discusses an upgrade to a molybdenum-bearing grade.
A grade name identifies an alloy, not a finished surface. Two machines can both carry SUS304 on the quotation and still differ in sheet thickness, weld dressing, roughness, corner geometry, and drainage. Those details affect how much residue remains after a rinse and how quickly a crew can clear it before the next shift. Grade 304 performs well in many food applications, but its corrosion resistance has practical limits in chloride-rich water and in crevices where liquid sits undisturbed. Design and cleaning practice therefore matter as much as the grade name in the material record. The practical route from wording to decision is to follow the contact path in order. Start with water and produce: list the surfaces the wash water touches and the surfaces the vegetable touches on the way in and out. Set a finish standard for each surface, including sheet thickness, weld grinding or pickling, a roughness target, and radiused corners instead of tight internal angles where debris collects. Review the non-metal parts: gaskets, seals, hoses, and any pump or valve components in the water circuit. Finally, match the assembly to the cleaning routine the plant actually runs, including detergent chemistry and rinse water quality. Thickness, surface finish, seals, piping, and material certificates remain supplier-confirmation items in that review.
Documents turn a supplier's material statement into a file the QA team can keep. A supplier may state SUS304 in the quotation and specifications, but the review is stronger when the paperwork matches the delivered unit. Penghui Machine states pre-shipment quality inspection and describes food-contact parts as 304 food-grade stainless steel. That information is easiest to verify when the document set is agreed before the order. Four items do most of the work:
Cleaning conditions deserve their own conversation because they shape the specification rather than follow it. A plant that foams and hand-brushes a tank twice a day places different demands on a surface than a plant running an automated rinse with alkaline detergent at elevated temperature. Chloride-heavy sanitizers are a common reason a stainless surface starts showing pitting around welds and in crevices, and that can appear months after commissioning. Under the EU food contact materials framework, materials must not transfer constituents to food in quantities that endanger health or change the food in an unacceptable way. That is why the finish standard, the non-metal declarations, and the cleaning rationale belong in one file. For a washing machine, that file also makes the specification review repeatable when the second or third unit arrives.
The grade name is the easy part. SUS304 gives the washer a durable alloy for continuous wet work, and it fabricates cleanly into tanks, piping, and conveyors. What quality teams approve is narrower: the surfaces that touch produce, their finish and welds, the seals and piping in the water circuit, and the cleaning routine the unit must survive. Bring those items into the first supplier conversation. If your team is preparing a food processing line, send contact-part questions, cleaning conditions, and site details — voltage, footprint, and target throughput — with the quote request, and ask for the contact-part list, finish standard, and available material documents alongside the price.
A: SUS304 refers to the 18/8 chromium-nickel austenitic stainless steel grade that the Japanese Industrial Standard lists as SUS304 and other systems call AISI 304 or UNS S30400. In a washing machine, it gives tanks, piping, and conveyor parts corrosion resistance for continuous wet service, along with the weldability and formability the build needs. The PH-6000 material specification uses SUS304, with contact parts described as 304 food-grade stainless steel; the item list should also identify seals, gaskets, finish, and available certificates.
A: The contact-part list is worth mapping before you sign. Tanks, spray piping, and conveyors are commonly 304, while gaskets, seals, hoses, pump components, and small fittings often come from other material families chosen for flexibility, sealing, or chemical resistance. Ask for each contact item with its grade and declaration so the whole water path is covered, not only the largest panels.
A: The core set is a mill test certificate or inspection certificate with heat numbers, a written surface finish and weld standard, material declarations for seals, gaskets, and piping, and a cleaning procedure compatible with your detergents and rinse water. Add the electrical and dimensional data for the unit you are buying so the specification file matches the machine that arrives. On the PH-6000, product information lists 380V, 1.5kW and an overall size of 6000 × 800 × 1300 mm; confirm the delivered unit against those values.
Grade 304 Stainless Steel: Properties, Fabrication and Applications
Food Contact Materials - Food Safety - European Commission
FSMA Final Rule on Produce Safety | FDA